Multi-Effect / Modeler (SansAmp acoustic multi-effect strip) · $269
The Tech 21 Acoustic Fly Rig is an analog sansAmp acoustic multi-effect strip pedal based on the SansAmp analog tube-amp emulation, with SansAmp: Level, Drive, sweepable semi-parametric active EQ, Notch Filter (70Hz-350Hz), Low Pass Filter (16kHz-1.5kHz); Boost (up to ~12dB with wide mid boost); COMP; Reverb (room to hall); DLA delay: Time, Repeats; switches: Phase Flip, Headphone, CHR chorus controls, made in USA. Features tap tempo. From $269.
| Category | Multi-Effect / Modeler (SansAmp acoustic multi-effect strip) |
| Circuit / based on | SansAmp analog tube-amp emulation |
| Signal | Analog |
| Controls | SansAmp: Level, Drive, sweepable semi-parametric active EQ, Notch Filter (70Hz-350Hz), Low Pass Filter (16kHz-1.5kHz); Boost (up to ~12dB with wide mid boost); COMP; Reverb (room to hall); DLA delay: Time, Repeats; switches: Phase Flip, Headphone, CHR chorus |
| Switches | Phase Flip (180-degree, anti-feedback), Headphone button (switches 1/4in out to headphone mode), CHR preset chorus, DLA/CHR select |
| Footswitches | Footswitchable sections: SansAmp, Boost, Comp, independent Reverb, DLA/CHR delay-chorus (hold for chromatic tuner + mute) with dedicated Tap Tempo footswitch; exact count not stated by mfr |
| Bypass | buffered |
| Tap tempo | Yes |
| I/O | 1/4in 1MOhm input, XLR output with ground lift, 1/4in low-impedance output (button switches to headphone mode) |
| Power | 9V DC |
| Power draw | 200 mA |
| Dimensions | 12.5 x 2.75 x 1.25 in |
| Weight | 20.7 oz |
| Country of manufacture | USA |
Closest matches from other makers, by spec and circuit.